|
brevity MTS: Not specified
Joined: 29 Nov 2012 Posts: 2 Location: United States
|
|
Posted: Thu Nov 29, 2012 4:12 pm |
|
|
I'm considering purchasing an 1100S and it would be my first italian bike. I've heard that maintenance on these 2 valve engines isn't that bad. My main question is, is it possible to do most everything with a standard set of tools? Specifically, oil changes, valve adjustments, belt replacment and wheel removal. For any of that will I need special or ducati specific tools? What about removing the rear wheel with the single sided swing arm, any special tools needed for that?
Thanks! |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
mollycbr123 MTS: 2010 1200S (White)
Joined: 14 Oct 2007 Posts: 3725 Location: Fayetteville, NC
|
|
Posted: Thu Nov 29, 2012 5:02 pm |
|
|
Removal of the rear wheel requires a fairly large socket (is it 46mm on the 1100s?), or you can buy one of the special socket tools for this purpose. The other maintenance chores you mentioned can be done with the same tools that you would use to do them on most other brands of motorcycles. No 'Ducati specific' tools required.
Oh, you may have to get a 'special' oil filter wrench if you stick with OEM filters. They can be difficult to get out due to being recessed in the engine cases. If you switch to K&N or aftermarket, no problem. |
|
|
_________________ STeve B in NC
'12 Multistrada S Touring
Yes, I do miss my air cooled multi...
Brand spanking new '16 Thruxton R |
|
|
| |
|
|
|
|
|
|
|
|
Gregski MTS: 2007 1100 (Red)
Joined: 14 Nov 2010 Posts: 519 Location: Surrey UK
|
|
Posted: Thu Nov 29, 2012 5:27 pm |
|
|
as above it is easy belt change one of the easiest jobs on Ducati
If you still wondering take one for a test ride and let it speak to you in its own "Italian" sounds |
|
|
_________________ Nie Ma Boga Jest Motór |
|
|
| |
|
|
|
|
|
|
|
|
brevity MTS: Not specified
Joined: 29 Nov 2012 Posts: 2 Location: United States
|
|
Posted: Thu Nov 29, 2012 11:17 pm |
|
|
Thank you both. Now really the only thing keeping me from buying is the gas tank swelling. I wouldn't want to buy used and find out my local dealer refuses to replace the tank either now or in the future. |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
mollycbr123 MTS: 2010 1200S (White)
Joined: 14 Oct 2007 Posts: 3725 Location: Fayetteville, NC
|
|
Posted: Fri Nov 30, 2012 2:17 am |
|
|
brevity wrote: | | | | Thank you both. Now really the only thing keeping me from buying is the gas tank swelling. I wouldn't want to buy used and find out my local dealer refuses to replace the tank either now or in the future. | | | |
I don't think he would really have any reason to, unless the tank had already been replaced. I've only read a few tales of dealers dragging their feet on tank replacements since the class action law suit was settled. |
|
|
_________________ STeve B in NC
'12 Multistrada S Touring
Yes, I do miss my air cooled multi...
Brand spanking new '16 Thruxton R |
|
|
| |
|
|
|
|
|
|
|
|
racinjunky MTS: 2006 620 (Red)
Joined: 23 Dec 2008 Posts: 359 Location: USA/Indianapolis
|
|
Posted: Fri Nov 30, 2012 10:33 am |
|
|
I bought my bike used and tank replacement was done no problem |
|
|
|
|
|
| |
|
|
|
|
|
|
|