Home
  The meeting place for Ducati Multistrada owners
Search the forums (advanced)
 
 Navigation
  Home
  Forums
  Photo albums
  Links
  Downloads
  Multistrada Wiki
  About us
 Login

Username:


Password:


 Log me on automatically each visit


Problems signing in?

Register
 
Forum index -   Wanna buy: Small parts ...?!
Post new topicReply to topic View previous topic :: View next topic
DJMcSpeed
MTS: 07 1100S (Black)

   

Joined: 18 Jan 2014
Posts: 27
Location: USA

PostPosted: Fri Jun 10, 2016 1:30 pm Reply with quote

Hello,

If you're like me, you're frustrated with the fact that you must purchase expensive assembles, rather than the small parts that are needed. I get that Ducati is supporting their dealer service departments, but, case in point, the clutch lever is sold with the swivel pin and screw in plunger that actuates the clutch. In my case I can't separate the pin from the plunger to use with new levers, but must purchase a new lever at $100.00 +-, just to get two small parts ... and a spare lever.

Is anyway aware of a solution for this?

_________________
DJ
MI-USA
View user's profileSend private message Top
DJMcSpeed
MTS: 07 1100S (Black)

   

Joined: 18 Jan 2014
Posts: 27
Location: USA

PostPosted: Fri Jun 10, 2016 1:34 pm Reply with quote

Sorry, the bike is a 2007 Multistrada 1100s, and the part No. is 626.4.034.1A (swivel pin and plunger not shown

Link to ebay photograph that does show small parts: http://www.ebay.com/itm/Ducati-Brembo-Cl...dds&vxp=mtr

Thanks in advance,

DJ

_________________
DJ
MI-USA
View user's profileSend private message Top
Prestob
MTS: 05 1000S DS (Red)

   

Joined: 14 Apr 2016
Posts: 9
Location: North Coast

PostPosted: Fri Jun 10, 2016 1:56 pm Reply with quote

Funny I'm in the same position but found an answer over at
http://www.webbikeworld.com/t2/pazzo/adjustable-levers.htm

Ducati put glue on the plunger but burn it off and you'll get to a small screw that can be removed to allow the plunger to unscrew. It is on my todo list tonight.

ben[/url]
View user's profileSend private message Top
DJMcSpeed
MTS: 07 1100S (Black)

   

Joined: 18 Jan 2014
Posts: 27
Location: USA

PostPosted: Fri Jun 10, 2016 2:10 pm Reply with quote

Beautiful! Thanks much!

I was hoping someone like me that keeps all those small parts, might have one, but this will work too!

_________________
DJ
MI-USA
View user's profileSend private message Top
Mattel
MTS: 12 1200S PP (Corse)

   

Joined: 31 Jul 2010
Posts: 3453

PostPosted: Sat Jun 11, 2016 11:14 am Reply with quote

I dont think you are correct. I have a Pazzio and it still requires the part that he is missing.

See down the page

" Parts and Pins
Here are the parts after removal from the OE adjustable lever. The 1.5 mm set screw is on the left, with the scarred up pin in the center and the rotating pin on the right. The 1.5 mm hex wrench is shown to illustrate the small size of these parts.

I used blue Loctite on these parts on reassembly, and I hope it holds everything together as well as the semi-permanent Ducati sealer."

You still need to locate that pin and plunger. Sorry....

_________________
The twisted sisters... 07 1100s, 08 1100s & 12PP Angry Duck
86 Honda v65, 86 Interceptor 1000,
If your really ATGATT, where is your airbag vest?:O
ATGATT+AIR!!!
View user's profileSend private message Top
Post new topicReply to topic  
Display posts from previous:    All times are
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum