Home
  The meeting place for Ducati Multistrada owners
Search the forums (advanced)
 
 Navigation
  Home
  Forums
  Photo albums
  Links
  Downloads
  Multistrada Wiki
  About us
 Login

Username:


Password:


 Log me on automatically each visit


Problems signing in?

Register
 
Forum index -   Wanna buy: Centre Stand Lift Handle
Post new topicReply to topic View previous topic :: View next topic
Matt S
MTS: 09 1100S (Red)

   

Joined: 27 Sep 2015
Posts: 33
Location: England

PostPosted: Wed May 03, 2017 1:40 pm Reply with quote

I have managed to get hold of a centre stand for my 2009 1100!!!

However, I don't have the lift handle. Does anyone know if there is a handle that will fit from another model?

Many thanks.

Matt
View user's profileSend private message Top
Spaceship
MTS: 05 1000 DS (Gray)

   

Joined: 03 May 2016
Posts: 4
Location: idaho

PostPosted: Wed May 03, 2017 3:08 pm Reply with quote

I wish the stands were easier to find


http://www.ebay.com/itm/Ducati-Multistra...dRc&vxp=mtr
View user's profileSend private message Top
moby34
MTS: 10 1200S (Red)

   

Joined: 15 Sep 2011
Posts: 2480
Location: Chicago Suburbs, USA

PostPosted: Wed May 03, 2017 3:48 pm Reply with quote

Looks similar to the 1200's, but not sure if same.
View user's profileSend private message Top
stevedf
MTS: 06 620 (Red)

   

Joined: 09 May 2016
Posts: 124
Location: USA/Phoenix

PostPosted: Sat Jun 24, 2017 8:15 pm Reply with quote

The lift handle from an ST2, ST3, ST4, will fit perfectly.
View user's profileSend private message Top
stevedf
MTS: 06 620 (Red)

   

Joined: 09 May 2016
Posts: 124
Location: USA/Phoenix

PostPosted: Sun Jul 09, 2017 7:43 pm Reply with quote

the MTS 1200 handle is on the opposite side of the tube, so is backwards for the 1000, 620, 1100.
View user's profileSend private message Top
DMT
MTS: 04 1000 DS (Gray)

   

Joined: 25 Nov 2016
Posts: 145
Location: Omaha, NE USA

PostPosted: Sun Jul 23, 2017 8:32 pm Reply with quote

Yep, ST2, ST3, ST4 and ST4s grab handles all work. Make sure to get the pin for the grab handle as well.
View user's profileSend private messageVisit poster's website Top
adamgloe
MTS: 09 1100S (White)

   

Joined: 20 Jul 2021
Posts: 2
Location: Seattle, WA

PostPosted: Mon Aug 02, 2021 2:08 pm Reply with quote

Resurrecting this thread, as the info was very helpful in helping me to find an ST4 lift handle after I added a center stand on my 1100s. DMT mentioned "get the pin for the grab handle"... I cannot remove the previous and transfer it over. What should I use? Any input appreciated. The 1100s does not have a threaded hole, so a pin has to be forced in as far as I can tell. Just wondering if there is a part number or to bang something in. Standard hex bolts interfere with the lift handle.
View user's profileSend private message Top
Jam23a30
MTS: Not specified

   

Joined: 26 Jun 2012
Posts: 136

PostPosted: Fri Aug 06, 2021 9:52 am Reply with quote

You should be able to source a rolled steel shear pin from your local engineering suppliers.

Seems brutal but get the correct diameter, hammer the thing into the hole and trim to length if required.

Andy
View user's profileSend private message Top
adamgloe
MTS: 09 1100S (White)

   

Joined: 20 Jul 2021
Posts: 2
Location: Seattle, WA

PostPosted: Fri Aug 06, 2021 2:22 pm Reply with quote

Thank you, that is very helpful!

I will mention here that there is a "Ducati Multistrada 620/1000/1100 Owners UK" facebook group I'm a part of, which is a great bunch and probably the only worthwhile one I know of on that platform. I sourced my center stand from a guy within that group who has several for sale. It came from Poland but was worth the wait and easier than trying to source one online. There are two versions by the way, depending on whether or not your exhaust is catted, or a race exhaust.


Also, the rolled steel shear pin as mentioned above, is illustrated in this center stand article I found after a long internet search. Putting it here for reference.

https://www.webbikeworld.com/ducati-gt1000-center-stand/
View user's profileSend private message Top
Cwedish
MTS: 07 1100S (Black)

   

Joined: 12 Apr 2021
Posts: 41
Location: United States

PostPosted: Sun Sep 12, 2021 1:08 pm Reply with quote

I use the rail from my Hepco and Becker side cases as handle. However, this has inspired me to look into the STx solution when I get a chance
View user's profileSend private message Top
stevedf
MTS: 06 620 (Red)

   

Joined: 09 May 2016
Posts: 124
Location: USA/Phoenix

PostPosted: Sat Sep 25, 2021 8:33 pm Reply with quote

The correct Spiroll pin is an M6x 20. Do not use a split roll pin!
View user's profileSend private message Top
Post new topicReply to topic  
Display posts from previous:    All times are
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum