|
Matt S MTS: 2009 1100S (Red)
Joined: 27 Sep 2015 Posts: 33 Location: England
|
|
Posted: Wed May 03, 2017 1:40 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
I have managed to get hold of a centre stand for my 2009 1100!!!
However, I don't have the lift handle. Does anyone know if there is a handle that will fit from another model?
Many thanks.
Matt |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|
|
Spaceship MTS: 2005 1000 DS (Gray)
Joined: 03 May 2016 Posts: 4 Location: idaho
|
|
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow2.gif) |
|
|
|
|
|
|
|
|
moby34 MTS: 2010 1200S (Red)
![](images/avatars/1632768524568a90c21b62e.jpg)
Joined: 15 Sep 2011 Posts: 2651 Location: Chicago Suburbs, USA
|
|
Posted: Wed May 03, 2017 3:48 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
Looks similar to the 1200's, but not sure if same. |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|
|
stevedf MTS: 2006 620 (Red)
Joined: 09 May 2016 Posts: 206 Location: USA/Phoenix
|
|
Posted: Sat Jun 24, 2017 8:15 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
The lift handle from an ST2, ST3, ST4, will fit perfectly. |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow2.gif) |
|
|
|
|
|
|
|
|
stevedf MTS: 2006 620 (Red)
Joined: 09 May 2016 Posts: 206 Location: USA/Phoenix
|
|
Posted: Sun Jul 09, 2017 7:43 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
the MTS 1200 handle is on the opposite side of the tube, so is backwards for the 1000, 620, 1100. |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|
|
DMT MTS: 2004 1000 DS (Gray)
![](images/avatars/12280501765860b01870b19.png)
Joined: 25 Nov 2016 Posts: 145 Location: San Antonio, USA
|
|
Posted: Sun Jul 23, 2017 8:32 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
Yep, ST2, ST3, ST4 and ST4s grab handles all work. Make sure to get the pin for the grab handle as well. |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow2.gif) |
|
|
|
|
|
|
|
|
adamgloe MTS: 2009 1100S (White)
Joined: 20 Jul 2021 Posts: 2 Location: Seattle, WA
|
|
Posted: Mon Aug 02, 2021 2:08 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
Resurrecting this thread, as the info was very helpful in helping me to find an ST4 lift handle after I added a center stand on my 1100s. DMT mentioned "get the pin for the grab handle"... I cannot remove the previous and transfer it over. What should I use? Any input appreciated. The 1100s does not have a threaded hole, so a pin has to be forced in as far as I can tell. Just wondering if there is a part number or to bang something in. Standard hex bolts interfere with the lift handle. |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|
|
Jam23a30 MTS: Not specified
Joined: 26 Jun 2012 Posts: 179
|
|
Posted: Fri Aug 06, 2021 9:52 am |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
You should be able to source a rolled steel shear pin from your local engineering suppliers.
Seems brutal but get the correct diameter, hammer the thing into the hole and trim to length if required.
Andy |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow2.gif) |
|
|
|
|
|
|
|
|
adamgloe MTS: 2009 1100S (White)
Joined: 20 Jul 2021 Posts: 2 Location: Seattle, WA
|
|
Posted: Fri Aug 06, 2021 2:22 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
Thank you, that is very helpful!
I will mention here that there is a "Ducati Multistrada 620/1000/1100 Owners UK" facebook group I'm a part of, which is a great bunch and probably the only worthwhile one I know of on that platform. I sourced my center stand from a guy within that group who has several for sale. It came from Poland but was worth the wait and easier than trying to source one online. There are two versions by the way, depending on whether or not your exhaust is catted, or a race exhaust.
Also, the rolled steel shear pin as mentioned above, is illustrated in this center stand article I found after a long internet search. Putting it here for reference.
https://www.webbikeworld.com/ducati-gt1000-center-stand/ |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|
|
Cwedish MTS: 2007 1100S (Black)
Joined: 12 Apr 2021 Posts: 42 Location: United States
|
|
Posted: Sun Sep 12, 2021 1:08 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
I use the rail from my Hepco and Becker side cases as handle. However, this has inspired me to look into the STx solution when I get a chance |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow2.gif) |
|
|
|
|
|
|
|
|
stevedf MTS: 2006 620 (Red)
Joined: 09 May 2016 Posts: 206 Location: USA/Phoenix
|
|
Posted: Sat Sep 25, 2021 8:33 pm |
![](templates/Multistrada/BlackCarbon/UserButtonsLinks.gif) ![Reply with quote Reply with quote](templates/Multistrada/BlackCarbon/lang_english/icon_quote.gif) ![](templates/Multistrada/BlackCarbon/UserButtonsRechts.gif) |
|
The correct Spiroll pin is an M6x 20. Do not use a split roll pin! |
|
|
|
|
|
| ![](templates/Multistrada/BlackCarbon/posttextrow1.gif) |
|
|
|
|
|
|
|