From Multistrada wiki

Main: DiagnosticSoftware

Lots of questions on the forum re Diag and the 5AM and 59AM ECUs

Leads are found on ebay Two are required a blue one like this;--

 VAG GROUP USB COM PORT OBD2 II KKL ECU DIAGNOSTIC CABLE LEAD VCDS-LITE 409   DO NOT USE ANY SOFTWARE THAT COMES WITH THIS LEAD 

Instead download the correct driver from JP's site.

and one like this;--

	 Fiat 3 pin OBD1 OBDI to OBD2 OBDII Convertor Connector Auto Scanner OBD Lead with flying +and- connectors 

These are around £20 the pair.

The Software is FREE at http://jpdiag.akress.com To get your licence follow the instructions to register your Ecu, then you will be able to use most of the program, Including resetting of service icon.

Do take time to read up everthing on JP's site. Also try Guzzidiag where instructions on re flashing are available.

Remember that you play with your ECU at your own risk. Please don't fry it by not following JPs advice.

LAST WORDS

NEVER connect pos and neg round wrong way!!

ALWAYS do a lead connection test before trying anything else, it's on the software (Connection test) Tab

Rick

Retrieved from http://www.multistrada.net/wiki/DiagnosticSoftware
Page last modified on Sun Sep 09, 2018 07:30 AM